Proximus Forum 5000 User Manual Download Page 122 | Manualshive

Page: 122 / 154

background image

Features and MenuCards

Main Menu

120

Note:

This type of call protection is only activated on the telephone
on which it was set. If your internal call number is configured on
the trunk or team keys of other telephones, call protection is
not automatically activated on those telephones.

2 Announcement pro…

: (Announcement protection) Switching on (

On

) or

switching off (

Off

) announcement protection for your device. When

announcement protection is activated, no announcements can be made to
your telephone (see also page 76). When there are multiple trunk keys
configured on your telephone, you can switch announcement protection for
each of these keys on/off. To do so, select the desired key and press

O

.

3 Telephone lock

: If you wish to temporarily allow another person to use your

telephone, you can activate the telephone lock. Then your telephone is given
the authorisations for the “Guests” user group. This user group is configured
by the system administrator and prevents unauthorised persons from
accessing, reading or making changes in the telephone’s menus and lists.
Dialling rights may also be restricted. Emergency numbers can be stored in a
special list assigned to your user group which can always be dialled,
regardless of the external authorisation. Please contact your system admin-
istrator for information on the altered range of functions when the telephone
lock is on. Telephone lock access is user-PIN protected. After entering the PIN
(

PIN:

), activate the function with the

On

option.

When the telephone lock is activated, the LED of the info key

i

is illumi-

nated while the info key is without function then.

4 Baby call

: Enter the destination (

Dest.:

). Activate the baby call with

On

.

5 Change PIN

: Enter your old user PIN then enter your new PIN twice. Contact

your system administrator if you have forgotten your user PIN. Your user PIN
can have up to six characters.

6 Delete keys

: After entering you user PIN (

PIN:

) all functions and numbers

that you have assigned to the keys are deleted.

7 Availability

: All active features that hinder your availability (call protection,

call forwarding, call waiting protection), are cleared.

8 Call wait. prot.

: (call waiting protection) During a telephone conversation,

no further calls are signalled by the call waiting tone. The new caller hears
the busy tone. Activate the function with

On

. When there are multiple trunk

keys configured on your telephone, you can switch call waiting protection for

«
...
120
121
122
123
124
...
»

Summary of Contents for Forum 5000



























































































































































Reviews:

No comments

Related manuals for Forum 5000

UNIVERGE SL2100

Brand: NEC Pages: 196

UNIVERGE SL2100

Brand: NEC Pages: 174

ElectraElite IPK

Brand: NEC Pages: 151

Brand: Uconnect Pages: 153

Brand: Aastra Pages: 30

ECL Comfort 110

Brand: Danfoss Pages: 8

Brand: Danfoss Pages: 16

Brand: Absima Pages: 5

Brand: LSS Pages: 14

EduTrainer 8071407

Brand: Festo Pages: 80

Brand: jWIN Pages: 13

SwitchPoint Infinity 3

Brand: Stryker Pages: 124

Brand: Vivax Pages: 68

Brand: JETI model Pages: 64

Brand: Daewoo Pages: 31

Brand: JVC Pages: 62

Stealthbox SB-CAN-G2MVX3D/10TW3

Brand: JL Audio Pages: 6

Brand: Boss Audio Systems Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands