Proximus Forum 5000 User Manual Download Page 81 | Manualshive

Page: 81 / 154

background image

Special Calls/Functions

Telephoning

79

(

Immediately

,

After delay

or

Busy

). You can, for example, configure call

forwarding

Immediately

for external calls to one call number, and call

forwarding

After delay

for internal calls to a different call number. During

configuration, the system administrator defines an interval in seconds for

After delay

call forwarding. You can replace this default with your own indi-

vidual value when programming

After delay

call forwarding. If more than

one forwarding mode has been activated,

Immediately

is given priority.

Call forwarding to a voicebox

If

Forum Voicemail

, the integrated voicemail system, is installed in the

communications system, you can also forward your calls to a voicebox
configured for you.

Call forwarding instances set up by the system administrator

●

Selective Call Forwarding:

The system administrator can programme

call forwarding where the call number of the caller is analysed (“SCF:
Selective Call Forwarding”).

●

Call filter:

The system administrator can use call filters to establish call

forwarding settings that apply to callers with specific call numbers or
callers with suppressed numbers.

Potentially this could be the reason why specific calls do not reach you. If you
have any questions concerning this functionality, please consult your system
administrator.

Least Cost Routing

Least Cost Routing (LCR) can be evaluated with call forwarding to external
numbers, provided your system administrator has configured LCR and its
application in the Forum 500 / Forum 5000 correspondingly. Ask your
administrator for the configuration applicable to you.

Hunt group call numbers

During system configuration, the system administrator can configure call
forwarding destinations for hunt group call numbers. These destinations are
called when all users of a hunt group are busy and/or when a call is not
accepted by any member of the hunt group within a certain time interval. You
cannot view or change this call forwarding on your device.

In addition, the system administrator can determine whether you can forward
incoming calls to the hunt group call number or not. If the system adminis-
trator does not permit call forwarding for your hunt group call number, any

«
...
79
80
81
82
83
...
»

Summary of Contents for Forum 5000



























































































































































Reviews:

No comments

Related manuals for Forum 5000

AeGIS 7000 Series

Brand: PACH & COMPANY Pages: 2

Brand: Panasonic Pages: 1

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 20

Brand: Bose Pages: 2

Brand: Nakamichi Pages: 13

Greengate ControlKeeper 4

Brand: Eaton Pages: 24

AMETEK ORBIT ACS Series

Brand: Solartron Metrology Pages: 63

Brand: dB Technologies Pages: 2

Brand: Sharp Pages: 68

Brand: Sharp Pages: 112

Brand: Sharp Pages: 33

Brand: Honeywell Pages: 98

Brand: Mitsubishi Electric Pages: 17

Brand: Mitsubishi Electric Pages: 20

Brand: Mitsubishi Electric Pages: 48

Brand: Mitsubishi Electric Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands