Proximus Forum 5000 User Manual Download Page 76

Page: 76 / 154

Telephoning

Enquiry, Toggling, Transfer and Conference

Internal/External Three-Party Conference

You have dialled an internal or external enquiry call (see the section entitled

Enquiry/Toggling by means of the R-Key or Another Call Key

starting on

page 71).

Note:

Interconnecting the two conference subscribers or removing
one of them from the conference is only possible using the
appropriate menu item in the MenuCard. 3-party conference
connections are not available.

If you wish to speak to one of the conference subscribers separately again or
remove one of them,

MenuCard “Conference”

Briefly

press the MenuCard key, then select the following from the

Conference

MenuCard …

Disconnect: 34565483

: This removes an external subscriber from the

conference.

Disconnect: 1234

: This removes an internal subscriber from the conference.

If the subscriber answers, inform them of the conference
and

Select the

Conference

menu item from the MenuCard

Subscr

on hold

. The conference is started.

End the conference by hanging up or pressing the
disconnect key.

Press this subscriber’s call key. You are now speaking with
this subscriber, while the other subscriber is on hold. Now
you can toggle again.

End your conversation with this subscriber by pressing the
disconnect key and

Then press the call key of the subscriber on hold.

Summary of Contents for Forum 5000



























































































































































Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands

Proximus Forum 5000, User Manual

Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands