manualshive.com logo in svg

Proximus Forum 5000, User Manual, Page: 17 / 154

Share
Download
Proximus Forum 5000 User Manual Download Page 17

Key Assignments

Forum Phone 515/525/535 System Telephones

15

Dial Keypad with ABC Assignment

2

This is for dialling call numbers or entering text. The key label does not 

show all the available letters and special characters. For more information, 
refer to the section entitled 

Entering Text

 on page 30.

Trunk Key (Call Key 1)

g

The trunk key of the telephone (also: call key 1) is occupied by your 

internal call number (main number). The key is located to the left of the 
display, and is labelled with your internal call number (or optionally, with a 
text programmed by the system administrator). Refer to the respective illus-
tration in the chapter 

Key Assignments

 starting on page 11 to determine the 

position of the key on your equipment. Your internal call number is assigned to 
an external call number where you can be reached when being called from an 
external number. It is possible to assign several external call numbers to the 
key. If you wish to make a call, lifting the handset seizes the key (and the trunk 
line); you can immediately dial an internal or external number (depending on 
the system setting). Long pressing the key displays a MenuCard which allows 
you to programme the key’s settings (see the section entitled 

MenuCard 

“Prog. call key”

 starting on page 132).

A system setting makes it possible to have your internal number assigned to 
other telephones as well. Calls will then be signalled to other telephones 
simultaneously.

The LED of the key indicates the current status, see also the chapter 

Signalling on the Call Keys

 starting on page 48.

For the System Administrator: Setting the Trunk Keys of the 
System Telephones

●

The internal call number for a system telephone is configured in the 

Configurator

, 

Telephony

: 

Ports

: 

Upn

 menu or for IP phones respectively 

in the 

Configurator

, 

Telephony

: 

Devices

: 

VoIP Phones

 menu. The 

assigned internal call number is automatically allocated to the trunk key 
(call key 1).

●

The assignment to external call numbers takes place in the 

Configurator

, 

Telephony

: 

Call Distribution

 menu. 

Summary of Contents for Forum 5000



























































































































































Reviews:

No comments