Main Menu
Features and MenuCards
113
Tip:
If you assign a hunt group number to a feature key, you can log
out from and log onto the hunt group by pressing single key. The
display will show you which hunt group number is assigned to
the feature key, which is useful if you are a member of several
hunt groups (see also
Programming Functions (Features)
starting on page 134).
5 Auto call Answer.
: You can specify a period of time after which calls to your
telephone are answered automatically. Enter the period of time in seconds
under
Duration:
(a value between 0 and 99 seconds). Then select whether
the automatic call answering should be activated for
Internal calls
,
External
calls
or for
Int. & Ext. calls
. You can activate this function with
On
or deac-
tivate automatic call answering with
Off
.
6 Device busy
: If there are multiple trunk keys configured on your telephone,
you can configure that as soon as one of the trunk keys is occupied your
device is considered busy. Any further callers hear the busy signal. You can
activate this function with
On
or deactivate it with
Off
. A “+” appears to
designate the function is activated.
MenuCard “Call Forwarding”
M P
Select
2 Call forwarding
, followed by …
1 Call diversion
: When you have multiple trunk keys configured on your tele-
phone, you can programme call forwarding for each of these keys individ-
ually. To do so, select the desired key from the displayed list and press
O
.
If the call forwarding should apply to all configured trunk keys, select the
Device
menu entry and press
O
.
Select
Immediately
,
After delay
or
Busy
to specify the type of forwarding and
press
O
. Then key in the
Dest.
of the call forwarding (please refer to the
chapter entitled
Manual or Automatic Line Seizure
starting on page 59).
Duration
: When programming call forwarding after time, enter the time in
seconds after which a call is to be forwarded (10 … 120 seconds). If you do not
enter a value, the default time interval provided by the system administrator
at system configuration is used (default: 20 seconds).
Then select whether
Internal calls
,
External calls
or
Int./ext. calls
are to be
forwarded to the destination (
Dest.
). If you assign the “Call diversion”
function to a feature key (see also
Programming Functions (Features)
starting
on page 134), you can also enter a
Text
for a label for the key. The label is
