Proximus Forum 5000 User Manual Download Page 83 | Manualshive

Page: 83 / 154

Proximus Forum 5000 User Manual Download Page 83

Special Calls/Functions

Telephoning

81

●

Recorded calls are stored in your voicebox, together with your voicebox
messages. The total capacity for all recordings

and

messages (of all users)

is 24 hours in a Forum 5500 communications system, and 6 or 24 hours
(with an additional memory module installed) in a Forum 5004/5008/
5012 communications system.

●

The recordings are stored in a separate list. You can display this list from
the main menu (see also the chapter

MenuCard “Calls”

starting on

page 109). In addition, you can view and edit the recordings list through
the web application

Forum CTI

.

Prerequisites

In order for you to be able to record calls, the system administrator needs to
make sure the following prerequisites are met.

●

He has to set up a voicebox for you (i.e. for the call number of your
terminal) (in the

Configurator

, menu

Applications

:

Forum Voicemail

:

Voice Boxes

).

●

The authorisation

Call record

has to be activated for your user group (in

the

Configurator

, menu

User Manager

:

User groups

).

Important privacy note

For privacy protection reasons it may be required to announce the start of a
call recording session with a beep. The administrator hast to activate the
authorisation

Call record with beep

for your user group (in the

Configurator

,

menu

User Manager

:

User groups

).

Operating the function on a system telephone

The “Call recording” function can be operated on the system telephone by
means of a programmed function key or via the status-dependent MenuCard

Conversation

.

●

For programming the function key, select the

6 Connections

entry on the

Main menu

MenuCard:

4 Call

:

0 Call recording

off. For more information,

please refer to the

Programming Functions (Features)

starting on

page 134 chapter.

●

See the

MenuCard “Conversation”

starting on page 64 chapter, for more

information on status-dependent menus.

«
...
81
82
83
84
85
...
»

Summary of Contents for Forum 5000



























































































































































Reviews:

No comments