Proximus Forum 5000 User Manual Download Page 84

Page: 84 / 154

Telephoning

Special Calls/Functions

Starting and stopping call recording (with a programmed function key)

You are in a telephone call.

Starting and stopping recording (via the “Conversation” MenuCard )

You are in a telephone call.

Notes

●

Call recording automatically ends if:

– the caller who started the recording session establishes an enquiry
connection,

– the recording memory is full or

– the connection is terminated.

Start recording

Press the function key. When the recording is session is
started, the LED of the key lights up. The LED is on during
the entire recording session.

If the communications system is configured accordingly, it
produces a beep when the recording session starts.

End recording

Press the function key again. The LED is switched off.

Start recording

Briefly

press the MenuCard key. The

Conversation

MenuCard is displayed.

Select Call recording

, press OK.

If the communications system is configured accordingly, it
produces a beep when the recording session starts.

End recording

Press the function key again. The

Conversation

MenuCard is

displayed.

Select Call recording

, press OK.

Summary of Contents for Forum 5000



























































































































































Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands

Proximus Forum 5000, User Manual

Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands