manualshive.com logo in svg

Proximus Forum 5000, User Manual, Page: 70 / 154

Share
Download
Proximus Forum 5000 User Manual Download Page 70

Telephoning

Accepting Calls

68

Call for a Virtual Number (Tele Secretary)

In the Forum 500 / Forum 5000, numbers can be configured to which no 
telephone and no subscriber are assigned (virtual numbers). The system 
administrator can forward a virtual number to another internal number, the 
number of your telephone for example. 

A forwarded call is signalled on the corresponding call key of your telephone. 
For informational purposes the virtual number to which the call was origi-
nally made is shown. The system administrator can also assign the virtual 
number a name. If this has been done, the name is shown on the display of 
your telephone.

External Calls with Unknown Call Number 

When you receive an external call where the caller indicates a different 
number than the one actually being transmitted (CLIP no screening), your 
display will show a “?” next to the call number. If the indicated call number is 
saved as a phone book entry, as usual, the name will be shown along with a 
question mark. Note: Display of the “?” can be deactivated by the system 
administrator.

i

Press the info key (hands-free mode).

or

g

Press the appropriate call key (hands-free mode).

H

Lift the handset.

or

i

Press the info key (hands-free mode).

or

g

Press the call key to which the call is being signalled (hands-
free mode). 

Summary of Contents for Forum 5000



























































































































































Reviews:

No comments