Proximus Forum 5000 User Manual Download Page 37

Page: 37 / 154

Using a Headset

Forum Phone 515/525/535 System Telephones

You have entered a call
number (block dialling/
automatic dialling).

Press the headset

key.

The call number is
dialled (LED of the
key

is illuminated).

Press the call key

and when necessary

press the hands-

free/open-listening
key.

Hands-free/open-
listening is switched on
(LED of the key

flashes).

You are telephoning
over the handset and
want to switch to the
headset.

Press the headset

key,

keep it pressed

and

replace the

handset.

You continue the call
over the headset (LED
of the key

is illumi-

nated).

You are telephoning in
hands-free/open-
listening mode (the
handset is on-hook, LED
of the key

is illumi-

nated); you want to
switch to the headset.

Press the headset

key.

Hands-free/open-
listening is ended (LED
of the key

is off);

you continue the call
over the headset (LED
of the key

is illumi-

nated).

You are telephoning
over the handset and
want to let a second
person listen in on the
call over the headset.

Press the headset

key.

Listening-in over the
headset is now acti-
vated (LED of the
key

flashes).

End listening-in:

Press the headset

key (LED of the
key

is off).

Situation:

Operation:

Result:

Summary of Contents for Forum 5000



























































































































































Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands

Proximus Forum 5000, User Manual

Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands