Proximus Forum 5000 User Manual Download Page 24

Page: 24 / 154

Forum Phone 515/525/535 System Telephones

Display and MenuCards

Labelling a Key

The keys can also be labelled in the

Configurator

of the Web console (in the

Telephony: Devices

System phones

menu). If the key labelling is changed in

the above mentioned manner or on the key extension, the new text will also
be displayed in the Configurator. Conversely, the modified texts will over-
write the display texts on the telephone or key extension.

Information regarding the aforementioned key extensions can be found in the
chapter

Key Extensions

starting on page 31.

Display and MenuCards

Changing the Language

Use the following procedure to set the display language:

In the Main menu you can use the

4 Phone settings

MenuCard to change the

language (see page 119).

Press the key (

long key press

), then …

Select

Modify text

Press the OK key.

In the following MenuCard under

Text:

enter the text (see

also the chapter

Entering Text

starting on page 30).

O O

Press the OK key twice.

Press the ABC key (long key press).

Using the arrow key scroll to the desired setting.

Confirm the setting with the OK key.

Summary of Contents for Forum 5000



























































































































































Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands

Proximus Forum 5000, User Manual

Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands