Promax RANGER Neo 2 User Manual Download

Page: 14 / 349

Chapter 1: INTRODUCTION

October 2021

interferences (some of its working frequencies are close to the TV bands), the

diagrams constellations or the echoes detection.

The

RANGER

Neo

has an application to manage data generated at each

installation. This feature helps the user to manage information generated so he

can access it at any time or download it to a PC for further analysis.

The

RANGER

Neo

has some extra tools such as T2MI, Network Delay and

DAB than differ from the

RANGER

Neo

(

RANGER

Neo

can be expanded

with DAB option). The

RANGER

Neo

in addition to all

RANGER

Neo

functions includes 4K real-time video decoding. All models can be expanded to

work with Fibre Optics or WiFi 5G and LTE 2.6 GHz.

In an effort to facilitate its work to professionals, our long experience ensures

an after sales quality service, which includes software updates and upgrades for

free.

The

RANGER

Neo

has been designed and developed entirely in the European

Union. A multidisciplinary team of highly qualified professionals has dedicated

effort and commitment to the development of a powerful, efficient and reliable

tool. During the manufacturing process, all used materials have been subjected

to a strict quality control.

Figura 2.

Introducing the RANGER NEO family

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands