Promax RANGER Neo 2 User Manual Download

Page: 189 / 349

October 2021

177

Chapter 5: TOOLS

Pilot frequencies 1 to 4 and power level of each one. These frequencies can

be selected by the user.

TILT value in dB/MHz and difference between pilot frequency 1 and pilot

frequency 4 in dB.

Graphic bar for each frequency pilot power and resulting TILT.

Softkeys.

•F1: Exits function.

•F3: Access other tools.

Joystick functions:

•Joystick up/down: Change of pilot frequency.

The Scan function shows on screen the signal level in a graph bar for each one

of the channels in the channel plan.

The

Scan

function is available for all DVB-C and DVB-C2 signals.

Connect signal to input and check in Settings the source signal is RF and

band is terrestrial. Select channel plan and tune a channel.

Press :

Tools

and select Tilt & Scan option. Then select Scan option.

Scan function opens.

5.23

Scan

5.23.1

Description

5.23.2

Operation

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands