Promax RANGER Neo 2 User Manual Download

Page: 163 / 349

October 2021

151

Chapter 5: TOOLS

The

Task Planner

function allows the user to set-up a task list, selecting when

to start, a repetition rate and other parameters. The equipment can be switched

off after setting all parameters and it will wake-up, at the required time, to

perform the scheduled tasks.

The Task Planner tool is available to run screenshots and dataloggers.

Press the Tools key.

Select the Task Planner option to access the Task Planner window that shows

a list of scheduled tasks. In the right column and next to each task there is

its status: if the date of the next execution appears then the task is pending;

if “finished” appears then the task has been executed; if nothing appears

then the task has not been scheduled.

Figure 108.

To add a new task press

: Tasks and select the "Add" option. It deploys a

menu with three options: Capture, Datalogger and Monitoring.

5.16

Task Planner

5.16.1

Description

Task planner

5.16.2

Operation

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands