Chapter 10: WEBCONTROL
224
October 2021
by pressing “Import” (this monitoring previously must be created and
exported using the “Export” option).
3
If you create a new monitoring, a box will appear that allows you to select
the channel plan that you want to monitor. In case the system detects a
monitoring that was not finished, then it allows you to load it in order to finish
it.
4
Next, the "Name" box appears. Write a name to identify the monitoring (a
single word). In the "Description" box add additional information.
5
A list will appear with all channels in the channel plan. Alarms on each
channel are available to be set.
6
To set an alarm from a channel, click on the cross icon next to channel. It
drops down a list with all parameters available.
7
Each channel can be configured with this parameters:
Auto: The system automatically tunes the channel and takes
measurements and reports an alarm when the user-defined condition is
met.
Manual: The system tunes the channel and waits during a time defined by
user (in seconds). Then it takes measurements and reports an alarm
when the user-defined condition is met.
Cycles: The system reports an alarm when the user-defined condition is
met during a number of consecutive cycles defined by user. If this box is
empty is equal to 1 cycle.
8
When the channel is deployed, the alarm configuration will appear:
Status unlocked: This condition is always enabled and reports alarm when
the channel is unlocked.
Parameter: Parameter to monitor.
OVER / UNDER: It indicates the condition to met in relation to the user-
defined value.
Pre-alarm: Press on the switch and enter the value so when the condition
is met it reports a pre-alarm. Value must be in decimal notation.
Alarm: Press on the switch and enter the value so when the condition is
met it reports a pre-alarm. Value must be in decimal notation.
9
Configure each channel to be monitored.
10
When configuration is finished, press on “Save”.
11
Select one monitoring in the box “Monitoring”.
12
To start monitoring press on “Start Monitoring”. Monitoring will start. To
delete a monitoring press on “Delete” or to export press on “Export”.
Summary of Contents for RANGER Neo 2
