Promax RANGER Neo 2 User Manual Download Page 138

Page: 138 / 349

Chapter 5: TOOLS

126

October 2021

According to the monitoring signal, saved parameters can change. For example,

in case of a FM signal, it also saves some RDS data like the PI and PS.

►

Screen Description

Figure 90.

Selected installation; date and time.

Power measurement over time.

MER and C/N measurement over time.

Joystick mode selected: PA mode (panoramic) or MA mode (cursor

movement).

LNB, selected band; battery level.

Signal information window 1: Measurement where the cursor is.

Signal information window 2: Date, time and elapsed time.

BScrollbar: it shows position and size of the data displayed related to total

data.

Time span of displayed data.

Menu Options:

•F1: Exits the data viewer.

•F2: It shows transmission parameters of the monitored signal.

•F3: It shows the monitored channel or for channel plan it allows selecting

the channel to view data.

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands