Promax RANGER Neo 2 User Manual Download

Page: 161 / 349

October 2021

149

Chapter 5: TOOLS

website) that can be filled and imported into the equipment (this template has

been created in an Excel file; the procedure explained below only works for the

Excel 2007 version and above).

Figure 107.

Next are the steps to fill in the template data and import them to the equipment:

►

Antenna Generator

Download the "Antenna XML Generator" template from the

PROMAX website

In the "Model" box enter the name by which the antenna will be identified

(maximum 8 characters).

In the "Description" box, type a description to identify the antenna.

In the "Impedance" box select the impedance of the antenna between 50

and 75 ohms.

In the "Height" box enter the antenna height in meters.

Now fill the calibration table of the antenna with the K factor according to

frequency.

Do not change units when filling the table.

Extend or contract the calibration table to the number of filled lines.

After filling the calibration table, go to option "Save As -> Other Formats.

In the window that appears, edit the file name in "File name".

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands