Promax RANGER Neo 2 User Manual Download

Page: 196 / 349

Chapter 6: WIFI MONITORING

184

October 2021

-When tuning by Channel it shows current channel. If selected channel is

the central channel of an Access Point then the AP is highlighted and

shows data for that Access Point.

BW: It shows Access Point (AP) bandwidth. Bandwidth changes depending

on the AP. Each AP can work in different bandwidths depending on

standard and configuration.

AvPower: RMS value of power detected (dBm) in the bandwidth occupied

by the AP or channel selected.

MaxPower: Maximum power detected (dBm) within the bandwidth

occupied by the AP or channel selected.

N.AP: Number of access points using the same channel. This number

determines if the channel is very saturated. If it is used by more than one

AP there may be times with a high percentage of use.

UTIL (%): Percentage of channel used. It is a measurement based on how

much time the channel is used. This measurement can help to decide if

this channel can accept another AP.

RSSI (Received Signal Strength Indicator): Power measured by the dongle

(USB WiFi adapter) for the selected Access Point. The dongle measures

the power of a single AP and the meter measures the power of an area of

the spectrum where there may be several APs. For this reason and also for

using different type of antennas on each device, the power measured by

the dongle and by the spectrum may not match.

SNR (Signal to Noise Ratio): SNR measured by the dongle (USB WiFi

adapter) for the selected Access Point.

WiFi Spectrum

It shows WiFi channels within the WiFi band, Access Points detected and name,

bandwidth and spectrum. Spectrum is drawn from the signal received by the

omni-directional antenna connected to the RF input.

This screen allows you to know how busy each channel is, how many APs share

spectrum, activity in each point of spectrum, etc. Spectrum not only shows WiFi

signals but any signals that use this band, such as those coming from security

video cameras, etc. which allows you to easily identify interferences in a

network.

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands