Promax RANGER Neo 2 User Manual Download

Page: 207 / 349

October 2021

195

Chapter 7: IPTV

Figure 135.

Selected installation; date and time.

Tuned service image.

Tuned service information.

TYPE: Encoding type and video transmission rate.

FORMAT: Resolution (horizontal x vertical), aspect ratio and frequency.

PROFILE: Profile level.

PID: Video program identifier.

Number of view/total views.

IPTV mode enabled; battery level.

Tuned service information.

NETWORK: Television distribution network.

PROVIDER: Program provider name.

NID: Network identifier where the signal is distributed.

ONID: Identifier of the original network where the signal originates.

TSID: Transport stream identifier.

SID: Service Identifier.

App. Type: Type of detected interactive service such as HbbTV, MHP and

MHEG-5. It also shows the URL related to the interactive service in F4 -

Advanced - Detected URLs.

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands