Promax RANGER Neo 2 User Manual Download Page 166

Page: 166 / 349

Chapter 5: TOOLS

154

October 2021

or to indicate if something prevented its execution. To access this function,

from Task Manager, press

: Task and then "View Log...".

The timer window contains several options for task scheduling.

Figure 112.

Start

•Start Now: The task begins immediately after leaving the task planner.

•On Date: The user selects the start date for the task (day / month / year)

and time (hour: minute).

Repeat every: The task repeats each cycle of time (days, hours and

minutes).

NOTE:

The equipment can be turned off after task planning as it will

automatically turn on when the time to task execution comes.

Two tasks cannot be executed simultaneously.

It is recommended that the datalogger selected have not enabled the

option to pause between channel plans, since in that case the process

would stop during the execution of the task.

The filename for the screen capture is automatically generated with the

following code: capture mode (SP for Spectrum mode, TV for TV mode,

ME for Measurement mode), capture channel (CHXX) and a consecutive

number.

5.16.3

Timer

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands