Promax RANGER Neo 2 User Manual Download

Page: 218 / 349

Chapter 9: INSTALLATIONS MANAGEMENT

206

October 2021

9 INSTALLATIONS MANAGEMENT

The Installations Management is a program embedded in the equipment that

allows the user to easily create a file (installation) to individually store and

manage data for each installation. Measurements, channel plans, screenshots

and any other data associated with the installation will be stored in the folder

corresponding to that installation. These measures can then be displayed and

downloaded to a PC.

If the user does not create any file installation, the equipment stores

measurements in the installation file by default (named "DEFAULT").

To access the Installations menu press the key

It shows up a window with a list of all available installations. On the softkeys

appears the options to manage these installations.

To exit the list of installations press the key

Figure 142.

9.1

Introduction

Installations management

9.2

Operation

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands