Promax RANGER Neo 2 User Manual Download

Page: 116 / 349

Chapter 5: TOOLS

104

October 2021

Measurement values for the signal tuned at the frequency/channel selected.

Average measurement value and standard deviation value of MER.

MER by carrier graphic.

Signal status (searching/locked/multiplex name).

Softkeys menus.

Joystick functions:

•Joystick left/right: Channel/frequency change (according to the tuning

mode).

Axis description:

•Axis X: Number of Carriers.

•Axis Y: MER.

At the bottom of the screen there are three menus available via the function

keys.

It displays the channel/frequency where is pointing the cursor, it

allows selecting channel plan and channel and access the tuning menu.

It displays the selected transmission standard menu and accesses

the signal parameters.

It displays the Tools menu.

The MEROGRAMA function shows a graphical representation of the MER level for

each carrier of the locked signal, which is superimposed over time. During the

MEROGRAM function, maximum and minimum of some parameters and the time

when they are reached are stored. This tool is especially useful for detecting

sporadic problems over time.

5.5.3

Menu Options

5.6

MEROGRAM

5.6.1

Description

MEROGRAM

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands