Promax RANGER Neo 2 User Manual Download

Page: 123 / 349

October 2021

111

Chapter 5: TOOLS

►

Screen Description

Figure 79.

Installation selected, date and time.

Selected band; battery level.

Status message depending on the attenuation level.

Power level of the signal.

Signal Frequency (MHz).

Power level of the reference signal obtained when setting the reference and

used to calculate the attenuation level (dBµV).

Power level of the test signal at the user access point (dBµV).

Attenuation level (dB); Attenuation = Reference - Current.

Softkeys.

Joystick functions:

•No function for this tool.

Axis description:

•Axis X: Pilot signals.

•Axis Y: Power.

In the bottom of the screen are four menu accessible via the softkeys.

Exits the tool.

5.8.3

Menu Options

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands