PCC-IV Instruction Manual (Rev. 0.1)
Page 6-46
Section 6
– Blockware Functions
Technical Reference
F118 [DAETDR] Delay After Energize Time Delay Relay (On Delay)
Function
DAETDR
simulates a "Delay After Energize" Time
Delay Relay, also known as an "ON Delay" function. The
Output may be inverted, see Parameter 2. The timing
diagram shows the default, non-inverted logic.
For non-Inverted Output: When the Input = "0", the Output is
"0", and the timer is reset to (Parameter 1) seconds. When
the Input = "1", the timer starts counting down, and the
Output changes to "1" when the timer counts down to 0
seconds.
-------------------------------------------------
--------------------------------------------
NAME: DAETDR SINGLE USE FUNCTION: N OUTPUT TYPE: D
---------------------------------------------------------------------------------------------
Input Type Description Notes
_____________________________________________________________________________________________
1 D INPUT
Parameter Description Default Max Min Code Notes
_____________________________________________________________________________________________
1 SECONDS DELAY 1 19999 1 2
2 INVERT OUTPUT 0=NO 1=YES 0 1 0 2
F119 [DADTDR] Delay After De-energize Time Delay Relay (Off Delay)
Function
DADTDR
simulates a "Delay After De-energize"
Time Delay Relay, also known as an "OFF Delay" function.
The Output may be inverted, see Parameter 2. The timing
diagram shows the default, non-inverted logic.
For non-Inverted Output: When the Input = "1", the Output is
"1", and the timer is reset to (Parameter 1) seconds. When
the Input changes from "1" to "0", the timer starts counting
down, and the Output changes to "0" when the timer counts
down to 0 seconds.
-------------------------------------------------
--------------------------------------------
NAME: DADTDR SINGLE USE FUNCTION: N OUTPUT TYPE: D
---------------------------------------------------------------------------------------------
Input Type Description Notes
_____________________________________________________________________________________________
1 D INPUT
Parameter Description Default Max Min Code Notes
_____________________________________________________________________________________________
1 SECONDS DELAY 1 19999 1 2
2 INVERT OUTPUT 0=NO 1=YES 0 1 0 2
0
5
10
15
20
25
30
35
0
5
10
15
20
In
p
u
t
Out
p
u
t
Seconds
DAETDR 5 sec. ON Delay
0
5
10
15
20
25
30
35
0
5
10
15
20
In
p
u
t
O
u
tp
u
t
Seconds
DADTDR 3 sec. OFF Delay
