PCC-IV Instruction Manual (Rev. 0.1)
Page 6-48
Section 6
– Blockware Functions
Technical Reference
---------------------------------------------------------------------------------------------
NAME: DAE/DAD SINGLE USE FUNCTION: N OUTPUT TYPE: D
---------------------------------------------------------------------------------------------
Input Type Description Notes
_____________________________________________________________________________________________
1 D INPUT
Parameter Description Default Max Min Code Notes
_____________________________________________________________________________________________
1 ON DELAY SECONDS 1 19999 1 2
2 OFF DELAY SECONDS 1 19999 1 2
3 INVERT OUTPUT 0=NO 1=YES 0 1 0 2
F122 [REPTDR] Repeat Time Delay Relay
Function
REPTDR
provides repetitive Block Output cycling
(1, 0,
1, 0, …) with defined ON and OFF times. The Output
may be inverted, see Parameter 2. The timing diagram
shows the default, non-inverted logic.
For non-Inverted Output: When the Input is "0", the Output is
"0", and both ON and OFF timers reset. When the Input
changes from "0" to "1", the Output changes to "1", and the
ON timer starts (Parameter 1). If the Input is still "1", and the
ON timer times out, the Output changes to "0", the OFF timer
starts, and the ON timer resets. If the Input is still "1", the
Output changes to "1" and the cycle repeats until the Input
changes to "0".
---------------------------------------------------------------------------------------------
NAME: REPTDR SINGLE USE FUNCTION: N OUTPUT TYPE: D
---------------------------------------------------------------------------------------------
Input Type Description Notes
_____________________________________________________________________________________________
1 D INPUT
Parameter Description Default Max Min Code Notes
_____________________________________________________________________________________________
1 ON TIME SECONDS 1 19999 1 2
2 OFF TIME SECONDS 1 19999 1 2
3 INVERT OUTPUT 0=NO 1=YES 0 1 0 2
0
5
10
15
20
25
30
35
0
5
10
15
20
In
p
u
t
O
u
tp
u
t
Seconds
REPTDR 3 sec. ON, 1 sec OFF
