PCC-IV Instruction Manual (rev. 0.1)
Page 4-3
Section 4
–
Menu Operations
Entering the Main Menu
From the operator screen, pressing and holding the DIS soft-button for about 3 seconds
will bring up the Main Menu. All data entry, editing, and diagnostics are accomplished from
this menu and submenus. The menus may be entered at any time, and the PCC-IV blockware
will continue to execute normally. However, since the displays are showing menu data; none
of the front panel process mode display channels can be displayed or modified (i.e. Setpoint,
Controller Manual Output, etc.).
The menus can always be used to display all data in the PCC-IV memory, regardless of the
password or S/M status. However, data can only be changed if the password and/or S/M
mode restrictions are satisfied, see Sections 4 and 6.
The majority of the blockware parameters (tuning, alarm setpoints, time delays, characterizer
breakpoints, …) can be changed on-line with the blockware continuing to execute. However,
PCC-IV must be in service manual (S/M) mode to change parameters that have a drastic
effect on the controller outputs (see Section 6).
Menu Tree
Main Menu
Quick Parameters
Service Manual
Password
Browse Blocks
Utilities
Modbus Ports
Main Menu
Quick Parameters
Service Manual
Password
Browse Blocks
Utilities
Modbus Ports
Screen Utilities
Calibrate Touch
Clean Screen
Enable Buzzer
Choose Theme
Set Touch Sensitivity
Screen Utilities
Calibrate Touch
Clean Screen
Enable Buzzer
Choose Theme
Set Touch Sensitivity
Choose Theme
Ranger
Ocean
Dark Orange
Choose Theme
Ranger
Ocean
Dark Orange
Service Manual
Set All Outputs to Auto
Set All Outputs to S/M
Change One Output
Service Manual
Set All Outputs to Auto
Set All Outputs to S/M
Change One Output
Password
Log Out
Enter Password
Change Operator PW
Change Technician PW
Change OEM Technician PW
Change Engineer PW
Change OEM Engineer PW
Password
Log Out
Enter Password
Change Operator PW
Change Technician PW
Change OEM Technician PW
Change Engineer PW
Change OEM Engineer PW
Utilities
Set Clock Time/Date
Memory
Calibrate I/O
Screen Utilities
M4 Messages
Utilities
Set Clock Time/Date
Memory
Calibrate I/O
Screen Utilities
M4 Messages
Modbus Ports
RS485 Port
Ethernet Port 0
Ethernet Port 1
Modbus Ports
RS485 Port
Ethernet Port 0
Ethernet Port 1
Press and hold DIS
for about 3 seconds
