PMA KS 98, Manual

Page: 93 / 246

Inputs/outputs
Digital inputs
store
dynamic
This input reacts only on a positive flank, i.e. on a change from 0 to 1. With this flank, input values
x1...x4 are stored in the recipe block selected with
SetNo
. The values are stored in RAM and in
EEPROM.
+
With
store
= 0 or permanent 1, storage is omitted.
manual
manual = 0: automatic mode: recipe function active
manual = 1: manual mode: the values of inputs x1...x4 are applied to y1...y4 directly.
Analog inputs
x1...x4
In mode STORE (
store
=1), the values applied to
x1
...
x4
are written into the memory locations of
the group selected with
SetNo
.
The inputs are connected with the outputs directly in manual mode (manual = 1) and also when
the
SetNo
input is beyond range 1...5.
SetNo5
Selecting a recipe block:
The value of
SetNo
determines, which one of the 5 recipe blocks is selected. Selection is valid
for reading and storage (
r
store
). A recipe block is selected only with a value within 1...5 at
SetNo
. With
SetNo
out of range 1...5, the inputs are connected directly with the outputs
(independent of the status at the A/M input manual). This is required for cascading.
Analog outputs
y1 ... y4
The values at y(i) correspond either to the recipe block selected with
SetNo
or to inputs x(i) in
manual mode (
store
=1).
Casc
The value at output
Casc
is the value of input
SetNo
reduced by 5 and is used for
cascading.
Parameters:
Via interface, 20 parameters (5 recipe blocks each with 4 values) can be preset:
Parameter Description Range Default
Set1.1
Recipe block 1
Parameter 1 for recipe 1 -29 999...999 999 0
Set1.2
Parameter 2 for recipe 1 -29 999...999 999 0
Set1.3
Parameter 3 for recipe 1 -29 999...999 999 0
Set1.4
Parameter 4 for recipe 1
-29 999...999 999 0
Set2.1
Recipe block 2
Parameter 1 for recipe 2 -29 999...999 999 0
Set2.2
Parameter 2 for recipe 2 -29 999...999 999 0
Set2.31
Parameter 3 for recipe 2 -29 999...999 999 0
Set2.4
Parameter 4 for recipe 2 -29 999...999 999 0
Set3.1
Recipe block 3
Parameter 1 for recipe 3 -29 999...999 999 0
Set3.2
Parameter 2 for recipe 3 -29 999...999 999 0
Set3.3
Parameter 3 for recipe 3
-29 999...999 999 0
Set3.4
Parameter 4 for recipe 3 -29 999...999 999 0
Set4.1
Recipe block 4
Parameter 1 for recipe 4 -29 999...999 999 0
Set4.2
Parameter 2 for recipe 4 -29 999...999 999 0
Set4.3
Parameter 3 for recipe 4 -29 999...999 999 0
Set4.4
Parameter 4 for recipe 4
-29 999...999 999 0
9499 040 50611
Selecting and storage
93 REZEPT ( recipe management )