26.3
OUT4 and OUT5 ( process outputs 4 and 5 )
Functions OUT4 and OUT5 are used for process output OUT4 and OUT5 configuration and parameter setting. These two
relay outputs are always provided as standard. Function OUT4 is firmly allocated to block number 84, function OUT5 is
firmly allocated to block number 85. They are calculated firmly in each time slot.
With digital input
d1
used as signal source, it is switched to the relay output as specified in
Mode
. If analog input
x1
is used as signal source, switching from
x0
to
x100
is from 50% (hysteresis = 1%).
Inputs / outputs
Digital input:
d1
Standard signal with digital signal conversion
Analog input:
x1
Input signal with analog signal conversion
Configuration parameter:
Parameter
Description
Values
Default
Src
Signal source
Digital input
d1
Digital
t
Analog input
x1
Analog
Mode
Signal source action
direct/normally open
direct
t
invers/normally closed
inverse
x0
Analog input value
x1
at 0%
-29 999 ... 999 999
0
x100
Analog input value
x1
at 100%
-29 999 ... 999 999
100
9499 040 50611
Outputs
217
OUT4 and OUT5 ( process outputs 4 and 5 )
Summary of Contents for KS 98
