manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 63 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 63

3 Using the Configuration Interfaces

50

Installation and Configuration Guide, (CQW-AP108AG)

Guest Access Wizard

The Guest Access wizard enables you to configure the network to give guest users limited access 
while protecting the network from unauthorized use. For a complete description of guest access 
rules and options, see Chapter 8,  “Configuring Guest Access.”

To open the Guest Access wizard:

•

Click

Guest Access Wizard

 under AP Quick Start on the side menu.

The wizard (Figure 37) provides options to configure an internal landing page or an external 
landing page for users who open a web browser while on site.

Figure 37:

Guest Access Wizard

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments