manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 47 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 47

3 Using the Configuration Interfaces

34

Installation and Configuration Guide, (CQW-AP108AG)

2

Click

Next

 to continue to the next panel (Figure 20). Use this panel to configure network 

identity.

Figure 20:

QuickStart Network Identity

3

Configure the following information on this panel:

Default Gateway

IP address of the gateway to the wired network. Required if the IP address is 
not obtained automatically to provide complete network access. The default 
is the existing network gateway.

Domain Name Servers

IP address of the server supplying DNS service. Required if the IP address is 
not obtained automatically to provide complete network access. The default 
is the DNS server for the existing network. 

Date

Current date in MM/DD/YYYY format

Time

Current time in HH:MM:SS format (hours 0-23)

Time Zone

US-zone or GMT option. For US zone, click the radio button and select a 
time zone. For GMT, click the radio button and select an offset in HH:MM 
format.

Field

Description

SSID Name

Service set identifier for the network, also known as the Wireless Network 
Name. The default name must be changed. (required)

Network Density

Indication of how close the APs will be to each other. For closely spaced APs 
that can support high data rates, select the high density option. For maximum 
coverage at lower data rates, selection the low density option. The default 
setting is Low.

Field

Description

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments