manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual

The Planex CQW-AP108AG is a high-performance wireless access point, perfect for expanding your network coverage. Ensure a smooth setup and seamless operation with the comprehensive Installation And Configuration Manual available for free download from our website. Get started today and maximize your networking potential with this reliable product.

Share
Download
background image

Upgrading Software

Installation and Configuration Guide, (CQW-AP108AG)

225

Canceling a Distribution

To cancel software distribution at any time, you must click 

Cancel All.

 This cancels distribution to 

APs that have not yet been upgraded, restarts services that were shut down during the upgrade, and 
removes the image file from the AP RAM. Cancellation is performed serially for multiple AP 
distributions. Canceling during distribution does not cause any damage to the APs. If the 
distribution on a remote AP is cancelled, the AP will be automatically rebooted. You can cancel 
distribution to an individual AP at any time except when the status is Updating Flash…, Error, or 
Done (Rebooting…).

If you leave the Software Upgrade panel before the distribution is complete without clicking the 

Cancel All

, software distribution continues in the background, but it is not possible to return to the 

Distribution Status page. 

Download Status

During distribution, the Download State column displays the current status of the distribution 
process (see Figure 168). 

Status information is automatically updated every 10 seconds. The status information shows clearly 
the stage of the distribution process and identifies any problems. Table 15 lists the possible status 
values and their meaning.

Status

Explanation

Not scheduled

This AP has not been scheduled to receive a software update.

Scheduled

The update has been ordered for this AP, but has not yet begun.

Canceling

A request has been made to cancel the distribution; however, the request is not 
complete. For example, this message is displayed if a request has been made 
to cancel distribution to an AP waiting its turn in the distribution list.

Canceled

Distribution to the AP is canceled.

AP Unreachable

The enrolled AP is not reachable for distribution.

Retrying 1, Retrying 2

If communication with the AP is lost during distribution, the process waits for 
two minutes and then retries the distribution. Three retries are attempted 
before the process stops and an error message is presented. Retrying 1 and 
Retrying 2 status represent the first and second retries. Retries may occur, for 
example, during upgrade of backhaul APs, if the radio signal is temporarily 
lost and retrunking is required.

There is a timeout of 2 minutes in between retries. With a total of three retries, 
it can take up to 10 minutes before a distribution on an AP is deemed to be in 
error.

The message changes to In Progress .. (XX %) when the retry actually starts.

In Progress .. (XX %)

Upgrade is underway on the AP and is XX% complete.

Error

All retries have finished and the AP could not be upgraded due to some 
internal error. 

Unknown

An unknown error has occurred.

Image Integrity Error

The image has passed the compatibility test but failed the integrity check after 
the distribution, but before the flash update.

Updating Flashing ...

Image distribution is complete and it is being saved onto the AP's flash 
memory.

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments

Related manuals for CQW-AP108AG

H3C WA2200 Series Installation Manual preview
WA2200 Series
Brand: H3C Pages: 42
LevelOne PLI-3411 Quick Installation Manual preview
PLI-3411
Brand: LevelOne Pages: 33
HAN AP211 Installation Manual preview
AP211
Brand: HAN Pages: 2
Fortinet FortiAP U231F Quick Start Manual preview
FortiAP U231F
Brand: Fortinet Pages: 31
Ebyte E01-ML01DP5 User Manual preview
E01-ML01DP5
Brand: Ebyte Pages: 10
Ubiquiti UniFi Stadium XG Quick Start Manual preview
UniFi Stadium XG
Brand: Ubiquiti Pages: 16
Billion 64 series Configuration Manual preview
64 series
Brand: Billion Pages: 15
Philips NetX Getting Started Manual preview
NetX
Brand: Philips Pages: 2
Philips PAC03X User Manual preview
PAC03X
Brand: Philips Pages: 2
Philips CKA7740N/05 Quick Start Manual preview
CKA7740N/05
Brand: Philips Pages: 2
Philips BT6000C37 User Manual preview
BT6000C37
Brand: Philips Pages: 18
Philips BM7 User Manual preview
BM7
Brand: Philips Pages: 20
Philips ITS4843B Installation Manual preview
ITS4843B
Brand: Philips Pages: 78
Rosewill RNX-EASYN4 Troubleshooting Manual preview
RNX-EASYN4
Brand: Rosewill Pages: 6
Cradlepoint CradlePoint PHS300tw Quick Start Manual preview
CradlePoint PHS300tw
Brand: Cradlepoint Pages: 2
Buffalo AirStation WHR3-G54 Quick Setup Manual preview
AirStation WHR3-G54
Brand: Buffalo Pages: 10
Air Live WN-220ARM User Manual preview
WN-220ARM
Brand: Air Live Pages: 72
EnGenius ECB-8610 User Manual preview
ECB-8610
Brand: EnGenius Pages: 55

Brands by name

Popular brands

Load more brands