manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 228 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 228

Managing the System Configuration

Installation and Configuration Guide, (CQW-AP108AG)

215

Figure 161:

System Configuration - NMS Configuration

Enter the following values to set the NMS configuration:

Click

Apply

 to save the entries or 

Reset

 to return to the previously saved values.

Hardware Options 

Select

HW Options 

(Figure 162) to set the buzzer and the real time clock (RTC), which keeps 

track of the date and time in the event that the AP loses power. This feature is not required if the AP 
is always connected to the Internet. 

Field

Description

Primary Manager IP

Enter the IP address of the NM Portal or Wireless LAN Network Management 
Software server responsible for managing the AP. (required)

Auxiliary Manager IP 

If applicable, enter the IP address of the NM Portal AP used to manage the AP 
at the branch location (in conjunction with an Wireless LAN Network 
Management Software server as a primary manager. 

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments