manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 168 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 168

Installation and Configuration Guide, (CQW-AP108AG)

155

8

Configuring Guest Access

This chapter describes how to enable guest user access to the wireless network while protecting the 
network from unauthorized use. It contains the following sections:

•

Overview

•

Configuring Guest Access

•

Guest Access Services Panel

Overview

Guest access can be used to allow visitors to a facility to access the Internet through the wireless 
network without gaining access to the corporate network. Most current guest user solutions require 
guests to access a separate access point that is not part of the corporate network. The PLANEX 
solution eliminates this requirement by restricting guest access through VLAN tags on the existing 
access points. There is no need to set up special access points or to physically restrict the locations 
used for guest access.

Unauthenticated users are permitted to associate to an AP, but any web communications are 
captured and directed to a controlled landing page, the “captive portal.” The landing page allows 
the guest user to login using a web-based password scheme. The page can inform unauthenticated 
users of the network access policies and provide instructions on obtaining the guest password. 
Following successful authentication, the guest user is released from the captive pages and allowed 
to access any resource on the guest VLAN.

The VLAN configuration of the upstream network should make available only those network 
resources set aside for guest use. This often means prohibiting guest stations from accessing 
anything other than the corporate open subnet or the Internet.

For open guest access, the open access security option must be configured. This precludes the use 
of WEP Security Mode on APs that provide guest access, but does permit use of WPA Security 
Mode.

VLANs and security privileges are assigned to users by way of service profiles defined for user 
groups and bound to the network SSID. It is required that the VLAN configuration include DHCP 
and DNS services. 

Guest user authentication can be implemented using an internal or external landing page.

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments