Planex CQW-AP108AG Page 106 Installation And Configuration Manual Download

Page: 106 / 301

Configuring Inter Access Point Protocol (IAPP)

Installation and Configuration Guide, (CQW-AP108AG)

IAPP Statistics

The IAPP Stats tab (Figure 65) lists information about IAPP activity.

Figure 65:

IAPP Configuration - IAPP Stats

This tab contains the following information:

Item

Description

Add Notifications Sent

Number of add-notifications sent to other APs in the local multicast domain
due to stations associating to the AP

Add Notifications
Received

Number of add-notifications received by the AP due to stations associating
with other APs in the local multicast domain

Move Notifications Sent

Number of move notifications sent to other APs where the stations were
previously associated

Move Notifications
Received

Number of move notifications received from other APs to which the stations
are currently associated

Move Responses Sent

Number of move responses sent to other APs when stations have reassociated
with the other APs

Move Responses
Received

Number of move responses received from other APs in the process of stations
reassociating with this AP

Move Notifications
Timeouts

Number of move notifications which were not sent in the maximum time
allowed for a move transaction

Move Notifications
Retransmitted

Number of times the move notifications were retransmitted for all the move
transactions (not supported)

Summary of Contents for CQW-AP108AG














































































































































































































































































































Search results

Summary of Contents for CQW-AP108AG

Reviews:

Related manuals for CQW-AP108AG

Brands by name

Popular brands

Planex CQW-AP108AG, Installation And Configuration Manual

Search results

Summary of Contents for CQW-AP108AG

Reviews:

Related manuals for CQW-AP108AG

Brands by name

Popular brands