manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 256 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 256

Wireless: Radio enabled (BSS Enabled)

Installation and Configuration Guide, (CQW-AP108AG)

243

Wireless: Radio enabled (BSS Enabled)

Notification which indicates that AP radio has been enabled.

Syntax: 

"Device ID %s radio %d is enabled, its operational state is %d operating on 
%d"

Description: 

Notification which is generated when a AP radio (BSS) is enabled

Usage:

This indicates successful start of a BSS and also provides the channel on which the 
AP radio will be operating on.

Examples:

Device ID AP_00-0A-F5-00-01-B6 radio 4 is enabled, its operational mode is 1 and 
operating on 64

See Also: 

Wireless: Radio Disabled (BSS disabled)

Notification which indicates that the AP radio has been disabled.

Syntax: 

"Device Id %s radio %d disabled"

Description: 

Notification which indicates that AP has been disabled.

Usage:

The AP radio can be disabled for several reasons such as:
a. User Triggered (administrative disabling)

Alarm Parameters

 DeviceId

The Device ID of the 108 Mbps Wireless AP

Radio

Identifies Radio by interface ID on the Access Point

Operational Mode

This indicates the operational mode of the radio whether it is 802.11a, 

802.11b or 802.11g

Channel ID

This indicates the channel on which the AP is operating.

Alarm Severity

Severity

Critical

Alarm Parameters

 DeviceId

The Device ID of the 108 Mbps Wireless AP

Radio

Identifies Radio by interface ID on the Access Point

Alarm Severity

Severity

Critical

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments