manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 281 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 281

C Alarms

268

Installation and Configuration Guide, (CQW-AP108AG)

frame. All packets received by the AP are always encrypted with the pairwise/
unicast key.

Examples:

For device-id AP_00-0A-F5-00-01-89 , a bad TKIP MIC was detected on an incoming 
unicast packet from STA 00:0a:f5:00:05:cc on radio 0

See Also: 

Security: BP Detected Bad TKIP MIC on Incoming Unicast

Notification which indicates that the BP has detected a BAD TKIP MIC value in an incoming 
frame from the AP that is encrypted with the pairwise/unicast key.

Syntax: 

"For device-id %s, a bad TKIP MIC was detected by local BP radio %d on 
an incoming unicast packet from the AP %s" 

Description: 

This notification is generated when a bad TKIP MIC is detected by a local BP 
radio, identified by aniApRadioIndex, on an incoming unicast packet from the AP, 
where the packet is encrypted with the pairwise/unicast key.

Usage:

This indicates that the BP has detected an invalid TKIP MIC value on an incoming 
frame encrypted with the pairwise/unicast key.

Examples:

For device-id AP_00-0A-F5-00-01-89 , a bad TKIP MIC was detected by local BP radio 0 on 
an incoming unicast packet from the AP 00:0a:f5:00:06:22

See Also: 

BP Detected Bad TKIP MIC on Incoming Multicast/Broadcast

Security: BP Detected Bad TKIP MIC on Incoming Multicast/Broadcast

Notification which indicates that the BP has detected a BAD TKIP MIC value in an incomng frame 
from the AP that is encrypted with the group/multicast/broadcast key.

Syntax: 

"For device-id %s, a bad TKIP MIC was detected by local BP radio %d on 
an incoming multicast/broadcast packet from the AP %s" 

Alarm Parameters

 DeviceId

The Device ID of the 108 Mbps Wireless AP

 Radio

Identifies Radio by interface ID on the Access Point

 AP MAC address

The MAC address of the source AP

Alarm Severity

Severity

Critical

Alarm Parameters

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments