manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 184 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 184

Using the Network Topology Menu

Installation and Configuration Guide, (CQW-AP108AG)

171

Figure 123:

Network Topology - Backhaul Topology

This panel contains the following information for each backhaul link:

Viewing IP Topology 

The IP Topology panel lists all the APs discovered by NM Portal. Choose 

IP Topology

 from the 

Network Topology menu to display this information (Figure 124). 

Field

Description

Channel ID

RF channel over which the backhaul traffic travels

Source AP

AP that begins the uplink backhaul trunk. The Source AP link opens the web 
interface for the AP in a new browser window.

Source Radio

MAC address of the radio used for the uplink (wlan0 or wlan1).

Destination AP

MAC address of the radio that ends the backhaul trunk

Destination Radio

Radio used for the destination (wlan0 or wlan1)

Retrunk Count

The number of times a functioning backhaul radio reestablishes a trunk. A 
new backhaul can be established to any AP within RF range (retrunk does not 
necessarily mean re-connection to the same AP). If the retrunk count is high, 
the network has a high level of instability in its wireless inter-access point 
connections.

Rediscover Now button

Begins the rediscovery process.

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments