Planex CQW-AP108AG Page 229 Installation And Configuration Manual Download

Page: 229 / 301

10 Maintaining the Access Point

216

Installation and Configuration Guide, (CQW-AP108AG)

Figure 162:

System Configuration - Hardware Options

Select the following parameters on this tab

Click

Apply

to save the entries or

Reset

to return to the previously saved values.

Managing the AP Configuration

Choose

Configuration Management

from the System Services menu to open the Configuration

Management feature panel. The panel contains the following tabs:

•

Secure Backup—Use https to perform a secure backup of the AP configuration.

•

Configuration Backup—Back up and restore configurations, export log files, and reset the AP
configuration to the factory defaults.

•

Configuration Reports—View configuration reports for the AP.

•

Reset Configuration—Revert to the factory default configuration, or reset specify subsystems
to default configuration.

Secure Backup

Perform the following functions on the Secure Backup tab (Figure 166):

Field

Description

Enable Real Time Clock

Use the real time clock (RTC).

Enable Buzzer

Activate the AP buzzer to locate the AP, if necessary.

Task

Steps

Back up the AP
configuration using
https

Click

Save Configuration

When the configuration is generated, a hyperlink is displayed. Right-click
and select

Save As

to save the configuration locally.

After the configuration file is saved, click

Delete

to remove the file from

the AP. The file takes up space on the AP disk, so it is recommended to
remove it.

Summary of Contents for CQW-AP108AG














































































































































































































































































































Search results

Summary of Contents for CQW-AP108AG

Reviews:

Related manuals for CQW-AP108AG

Brands by name

Popular brands

Planex CQW-AP108AG, Installation And Configuration Manual

Search results

Summary of Contents for CQW-AP108AG

Reviews:

Related manuals for CQW-AP108AG

Brands by name

Popular brands