manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 277 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 277

C Alarms

264

Installation and Configuration Guide, (CQW-AP108AG)

Description: 

This notification is generated when an upstream AP sends an EAP success before 
authentication is completed. This may be a rogue AP trying to force an AP to join 
even before authentication is complete.

Usage:

This indicates that the local BP has received an EAP-Success before authentication 
has even been completed. 

Examples:

For device-id AP_00-0A-F5-00-01-89 , the upstream AP 00:0a:f5:00:06:22 with SSID 
NewYorkRm authenticating via local BP radio 0 sent EAP-Sucess before authentication 
completed : IT MIGHT BE A ROGUE AP

See Also: 

Security: Profile not configured for user-group 

Notification which indicates that the AP has determined that a STA is a member of group for which 
a corresponding service profile has NOT been configured in this SSID. 

Syntax: 

"For device-id %s, the STA %s on radio %d with user %s is in group %s but 
SSID %s has no profile configured for that group" 

Description: 

This notification is generated during Station authentication when no service profile 
has been configured for a given Group.

Usage:

This indicates that the AP has detected a STA is authenticating which is a member 
of a group for which no service profile has yet been configured  in this SSID. 

Examples:

For device-id AP_00-0A-F5-00-01-89 , the STA 00:0a:f5:00:05:cc  on radio 0 with user 
paul is in group employee but SSID NewYorkRm has no profile configured for that group.

See Also: 

Severity

Critical

Alarm Parameters

 DeviceId

The Device ID of the 108 Mbps Wireless AP

 Station

MAC address of the Station.

 Radio

Identifies Radio by interface ID on the Access Point

 User

User ID 

 Group

Group tag for this user (determined from RADIUS configuration)

 SSID

Identifies the SSID on this AP that the STA has associated with.

Alarm Severity

Severity

Critical

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments