manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 130

Configuring Advanced QoS

Installation and Configuration Guide, (CQW-AP108AG)

117

Configure the following fields on this tab:

Click

Apply

 to save your changes or 

Reset

 to return to previously saved values.

QoS Stats

The QoS Stats tab (Figure 84) presents incoming packet and outgoing packet counts for each of the 
AP interfaces. The counts are indexed to one of the eight available COS levels. Every statistic is a 
comma-separated set of numbers, each of which corresponds to one of the COS levels: 0-7. For 
example, the out-of-packet count for wlan0 in the figure shows 77614 packets at COS level 0 and 
36127 packets at COS level 7.

Click

Clear Statistics

 to return the values to zero and restart the collection process.

Figure 84:

QOS Configuration - QOS Stats

Configuring Advanced QoS

Use the Advanced QoS panel to assign COS values to packets entering the AP based on IP layer 
information and choose the QoS class order. The panel contains the following tabs:

•

Class-Order—Determine the order in which to apply all the QoS rules.

•

IP-DSCP—Define COS mapping based on the first 6 bits in the TOS byte of the IP header. 

•

IP Protocol—Use standard IP protocol numbers assigned to different IP layer protocols.

•

IP Precedence—Define COS mapping based on the first 3 bits in the TOS byte of the IP header.

Field

Description

Select Radio Interface

Select the AP interface.

Default

Select to use the default mapping.

TCID

If Default is not selected, map each COS level to a TCID level.

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands