manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 205 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 205

9 Managing the Network

192

Installation and Configuration Guide, (CQW-AP108AG)

Click

Add

 to save the configuration information. 

IP Range 

Select

IP Range

 to configure address ranges for DHCP leases (Figure 143).

Figure 143:

NM Services - DHCP Configuration - IP Range

Enter the following information on this panel:

NTP Server

Enter the IP address of the server or servers used to synchronize network 
clocks. There is no default. More than one NTP IP address may be specified 
(space separated). 

If you delete NTP servers, only those added manually are deleted. DHCP-
assigned NTP servers continue to be available.

Field

Description

Interface Name

Confirm the alphanumeric name of the AP interface. The default is br1, which 
is the default bridge.

IP Address Range

Select a radio button to specify the range of addresses available for 
assignment. Choose either of the following:

•

IP Address/Maskbits—Enter the address and maskbits that define the 
subnet to be used for address assignment.

•

Use Fixed IP Address Range—Specify a range of IP addresses by entering 
starting and ending addresses, with subnet prefix length.

Field

Description

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments