manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 206 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 206

Using the NM Services Menu

Installation and Configuration Guide, (CQW-AP108AG)

193

Click

Apply

 to save the address information. Add additional interfaces if desired. The added 

interfaces are listed in the DHCP Address Range table at the bottom of the panel. To delete a DHCP 
interface, select the interface in the DHCP IP Address Range table, and click 

Delete

.

Leases

The Leases tab (Figure 144) lists each network computer serviced by DHCP and its lease 
information.

Figure 144:

NM Services - DHCP Configuration - Leases

This table contains the following information:

Field

Description

MAC Address

Address that uniquely defines the DHCP client

Leased IP Address

IP address assigned by the DCHP server

Lease Time Remaining

Amount of time remaining on the current DHCP lease (in hours)

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments