Planex CQW-AP108AG, Installation And Configuration Manual

Page: 225 / 301

10 Maintaining the Access Point
212 Installation and Configuration Guide, (CQW-AP108AG)
IP Configuration
Use the IP Configuration tab (Figure 158) to update the IP and basic system configuration for the
108 Mbps Wireless AP.
Figure 158: System Configuration - IP Configuration
The tab is divided into two sections. Click
Apply
after configuring each section, or
Reset
to return
to the default values. Configure the following fields:
Field Description
DHCP Assigned IP
address Enables the AP to obtain an IP address for the AP from the network
DHCP server.
DNS IP Address Enter the IP address of the DNS server. (required)
Management IP address
/Maskbits Enter the IP address and subnet prefix of the management server.
(required)
Gateway IP address Enter the IP address of the network gateway. (required)
Host Name
Enter a unique name for the AP. The default is the device ID,
which is derived from the MAC address. (required)
AP Location
Enter a text description of the physical location of the AP.
Administrator Contact
Enter the email address of the administrative contact for the AP.