manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 56 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 56

Navigating the Web Interface

Installation and Configuration Guide, (CQW-AP108AG)

43

Portal Config Tab

Use the Portal Config tab (Figure 29) to enable portal services on this AP. See “Portal 
Architecture” on page 4 for a description of the portal services. 

Figure 29:

AP Quick Start - Bootstrap Configuration - Portal Config

Admin Email Tab

If the AP is configured as a portal AP, use the Admin Email tab (Figure 30) to specify how to alert 
the network administrator regarding critical faults or security breaches. Configure the following 
fields:

Synchronize Clock

Indicate whether time will be synchronized manually through the date and 
time fields, or by way of an NTP server. If you select the server option, enter 
the IP address of the server in the space provided. If an NTP is currently 
assigned, the address of the server is displayed, as shown in 

Figure 28.

Multiple NTP servers may be specified (space separated). If more than one 
server is specified, they are contacted in the order given. If the Synchronize 
Clock is empty, then all manually configured NTP servers will be deleted.

If the AP is configured to receive an IP address via DHCP, then the DHCP 
server could also return the set of NTP servers. In such a scenario the 
manually configured NTP servers take precedence over the DHCP returned 
NTP servers.

If you delete NTP servers, only those added manually are deleted. DHCP-
assigned NTP servers continue to be available.

Field

Description

SMTP Server Address

Enter the IP address of the SMTP server used to reach the network 
administrator.

Admin E-mail Address

Enter the email address of the network administrator.

Field

Description

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments