manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 254 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 254

Software Download: Image Download Succeeded

Installation and Configuration Guide, (CQW-AP108AG)

241

Description: 

This alarm is sent when a policy downloaded to an AP could not be consumed 
correctly either due to an error in the policy or software version mismatch or due to 
some other error.

Usage:

Informational log.

Examples:

For accesspoint Node AP_00-0A-F5-00-01-7D The policy [defaultpolicy.xml] from 
[TrustedManager] could not be downloaded due to error 22549 at time[Wed Feb 11 
17:28:38 2004 ]

See Also: 

<Policy Download Successful>

Software Download: Image Download Succeeded

Alarm generated when an image is successfully downloaded and applied to an AP.

Syntax: 

For accesspoint 

Node

 %s the software 

image

 [%s] 

from

 [%s] was 

successfully downloaded at 

time

[%s]

Description: 

This alarm is when an image is successfully downloaded and applied to an AP.

Usage:

Informational log.

Examples:

For accesspoint Node AP_00-0A-F5-00-01-77 The software image [1.1.0, build 3278, 
AGN1dev, 

PLANEX In

c., ] from [AP_00-0A-F5-00-01-77 ] was successfully downloaded 

at time[Fri Jan 7 06:04:47 2000 ]

See Also: 

<Image Download Failed, Software Distribution Succeeded>

Software Download: Image Download Failed

Alarm generated when an image is un-successfully downloaded and applied to an AP.

Syntax: 

For accesspoint 

Node

 %s The software 

image

 [%s] 

from

 [%s] could not be 

downloaded due to 

error

 %d at 

time

[%s]

Alarm Parameters

Node

The device ID of the remote AP

image

The image version information

from

The device ID of the source of the image

time

The time at which the image was consumed

Alarm Severity

Severity

Critical

Alarm Parameters

Node

The device ID of the remote AP

image

The image version

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments