manualshive.com logo in svg

Planex CQW-AP108AG, Installation And Configuration Manual, Page: 250 / 301

Share
Download
Planex CQW-AP108AG Installation And Configuration Manual Download Page 250

Discovery: Discovered new node

Installation and Configuration Guide, (CQW-AP108AG)

237

Discovery: Discovered new node

Alarm generated when a new 108 Mbps Wireless AP is discovered in the nework.

Syntax: 

DeviceId %s discovered node [deviceId=%s, IP=%s, 

Subnet=%s].

Description: 

This alarm is generated when an 108 Mbps Wireless AP is discovered by the NM 
Portal the first time. 

Usage:

Informational log.

Examples:

DeviceId AP_00-0A-F5-00-02-1F discovered node [deviceId=AP_00-0A-

F5-00-01-B0, IP=192.168.75.244, Subnet=255.255.254.0].

See Also: 

<Node deleted from network>

Discovery: Node deleted from network

Generated when a node is deleted from the Portal network.

Syntax: 

DeviceId %s Node [Ip=%s, persona=%d] deleted from database.

Description: 

This alarm is generated when the a discovered node is deleted from the system. 
When a node is deleted, all information about that node is erased from the Portal. If 
the node’s IP address falls within the discovery scope, then the node will be re-
discovered and added back to the set of the discovered nodes on the next discovery 

Alarm Parameters

DeviceID

The Portal’s Device ID.

deviceId

The discovered node’s device ID

IP

The discovered node’s IP address

Subnet

The Subnet to which the discovered node belongs

Alarm Severity

Severity

Critical

Alarm Parameters

 DeviceId

The Device ID of the NM Portal

Ip

The IP address of the node being deleted.

Persona

The Persona of the node being deleted.

Alarm Severity

Severity

Critical

Summary of Contents for CQW-AP108AG














































































































































































































































































































Reviews:

No comments