Pitney Bowes Relay 5000 Operator'S Manual Download Page 9

Page: 9 / 202

SV63136 Rev. A

Contact Information List

USA Contacts

Product Name - Relay™ 5000/6000/7000/8000

• For frequently asked questions, go to:

www.pb.com

and click on

Customer Support

• To place requests for service or training, go to:

www.pb.com

and click on

My Account

• To order supplies and accessories, call the Supply Line

™

at: 1.800.243.7824 or go to:

www.

pb.com

and click on

Online Store

• To view and pay invoices online, go to:

www.pb.com

and click on

My Account

• To view inventory, go to:

www.pb.com

and click on

My Account

• For direct questions, call: 1.800.522.0020. Customer Service Representatives are available

Monday through Friday, 8:00 AM - 8:00 PM ET.

• To obtain Material Safety Data Sheets, call the Supply Line

™

or go to:

www.pb.com

and click on

Customer Support

Canada Contacts

Product Name - Relay™ 5000/6000 or Relay™ 7000/8000

▪ For frequently asked questions or to order supplies, go to:

www.pitneybowes.ca

▪ For direct questions, call: 1.800.672.6937. Customer Service Representatives are available

Monday through Friday, 8:30 AM - 4:00 PM ET.

Contacts in other countries

Contact information will be given either on a sticker on the system or in a separate document

supplied with your system.

Summary of Contents for Relay 5000










































































































































































































Search results

Summary of Contents for Relay 5000

Reviews:

Pitney Bowes Relay 5000, Operator'S Manual, Page: 9 / 202

Search results

Summary of Contents for Relay 5000

Reviews: