Pitney Bowes Relay 5000, Operator'S Manual, Page: 86 / 202

3-42 SV63136 Rev. A
3 • Basic Operation
You can make changes to the job settings using the procedure described
below.
1. From the Home screen select
Menu>Jobs>Edit Current Job .
2. Select Edit Job Settings .
3. The Job Comments screen displays. You can add Job Comments,
toggle the Batch Mode on or off, make adjustments to the Batch Count
and Set Over Max Count settings, or turn on the Use Postage Meter
feature.
NOTE: Refer to the Job Settings table in this chapter for more information
about these options.
4. Select Accept when done editing these options.
5. o retain your changes for this job, select Finished in the Edit Job
screen. To store the job changes permanently, select Save Current Job
in the Job screen. You must have supervisor or manager access rights
to save a job.
Modifying Job
Settings
Editing an Item
You can edit items to your mail piece one at a time using the procedure de-
scribed below.
To edit an item in a mail piece:
1. From the Home screen select
Menu>Jobs>Edit Current Job . The Edit
Job screen will display.
2. Use the UP/DOWN arrow keys to select the item. A highlight will appear
around the selected item.
3. Select E dit Highlighted Item .
4. The next screen that displays depends on the item you highlighted
(outer envelope, sheet, insert, fold, or booklet) in the Mail Piece Icon
Tree. Press the desired screen option in each menu to select from the
available parameters.
NOTE: Available menu items and associated options/actions for each item in
the Mail Piece Icon Tree are listed in the Job Options section of this chapter.
5. Select Accept when done editing these options.
6. To retain your changes for this job, select Finished in the Edit Job
screen. To store the job changes permanently, select Save Current Job
in the Job screen. You must have supervisor or manager access rights
to save a job.