manualshive.com logo in svg

Pitney Bowes Relay 5000, Operator'S Manual, Page: 168 / 202

Share
Download
Pitney Bowes Relay 5000 Operator'S Manual Download Page 168

8-22

SV63136 Rev. A

8 • Scanning

Reviewing 

a Scan 

Configuration

If necessary, you can view a list of marks associated with the Scan Configu-

ration without entering the Edit mode.

NOTE:  This option is only available if the PC Control is set to 

No

.

1.  From the Home screen, select 

Menu>Tools

.

2.  Select 

Configure System>Scan Configuration Setup

.

NOTE: 

 If you are not logged in with supervisor or manager access rights, you 

will be prompted to enter an access code.

3.  Select the appropriate scan type.
4.  The scan configurations for the selected scan type display. Use the UP/

DOWN arrow keys to select the scan configuration you want to review.

5.  Select 

Review Highlighted Item

.

6.  The Review Scan Code screen displays. The marks associated with the 

configuration appear in the Functions list. Use the UP/DOWN arrow keys 

to select the function you want to review.

7.  Select 

Finished

 once you have reviewed the list.

Viewing the Job 

List

View the jobs associated with the selected scan configuration. 

NOTE:  This option is not available if there are no jobs associated with the se-

lected Scan Configuration.

1.  From the Home screen, select 

Menu>Tools

.

2. Select 

Configure System>Scan Configuration Setup

.

NOTE: 

 If you are not logged in with supervisor or manager access rights, you 

will be prompted to enter an access code.

3.  Select the appropriate scan type.
4.  The scan configurations for the selected scan type display. Use the UP/

DOWN arrow keys to select the scan configuration with the job list you 

want to view.

5. Select 

View Job List for Highlighted Item

.

6.  The View Job List screen displays. Use the UP/DOWN arrow key to 

scroll through the job list.

7. Select 

Cancel

 to return to the Scan Configuration screen.

Summary of Contents for Relay 5000











































































































































































































Reviews:

No comments