manualshive.com logo in svg

Pitney Bowes Relay 5000, Operator'S Manual, Page: 129 / 202

Share
Download
Pitney Bowes Relay 5000 Operator'S Manual Download Page 129

SV63136 Rev. A  

6-11

Specifications • 6

Sheets

Sheets refer to material that must be folded before being inserted into 

standard letter envelopes. In the special case of flats, sheets are not folded. 

A group of sheets is referred to as a collation. 

Material Substrates

Acceptable paper types include new or recycled bond, text, laser and offset. 

Offset coatings including matte, dull or gloss.

NOTE:  Use of glossy material may degrade system performance.

Grain

Material may be short or long grain.

Printing

Printing may be simplex or duplex with no restriction on color.

Coating

Varnish applied to sheets to modify finish is allowed.

Laser-Printed Material

Freshly laser-printed material which meets the curl requirements is 

acceptable.

Feeder Tower - Sheet Specifications

Parameter

Minimum Value

Maximum Value

Width

5 inches (127 mm)

9.84 inches (250 mm)

Length

5.31 inches (135 mm)

14 inches (356 mm)

Thickness

0.003 inches (0.076 mm)

0.012 inches (0.305 mm)

Paper Weight

16 lb. (60 gsm)

44 lb. (175 gsm)

Summary of Contents for Relay 5000











































































































































































































Reviews:

No comments