manualshive.com logo in svg

Philips IntelliVue TRx, Instructions For Use Manual

The Philips IntelliVue TRx is an advanced medical device that offers accurate patient monitoring. For comprehensive user guidance, simply download the free Instructions For Use Manual from manualshive.com. This manual provides step-by-step instructions and valuable insights to ensure optimal usage of the IntelliVue TRx.

Share
Download
background image

Draft - 1 Aug 08

Contents-5

Pairing Non-networked Devices  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-16

Pairing with a Direct Connection to the MP5/MP5T . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-17
Pairing with a Short- Range Radio Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-17
Unassigning  Transceiver with SRRA at the Monitor  . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-19
Alarm Behavior (Non-networked) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-19
More Bed Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-21
Short- Range Radio Error Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-22

11.  Maintenance, Cleaning & Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . .   11-1

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-2

Basic Monitoring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-2
Testing Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-2
Label Assignment for Replacement Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-2

Cleaning and Sterilization  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-4

Cleaning the Transceiver  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-5
EO Sterilization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-7

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-14

Basic Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-14
Information Signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-15

12. Safety Standards & Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   12-1

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-2

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-2
Indications for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-2
Rx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-2
Patient Population . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-2
Authorized EU Representative . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-2
Safety Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-3
Essential Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-3
System Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-4
FCC Compliance (M4840A/USA only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-4
Industrie Canada Compliance (Canada) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-5
AC Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-5
Software Hazard Prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-5

Electromagnetic Compatibility  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-5

Reducing Electromagnetic Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-7
Restrictions for Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-7

Battery Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-8
Radio Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-9

TRx4841A  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-9

Summary of Contents for IntelliVue TRx



















































































































































































































































































Reviews:

No comments

Related manuals for IntelliVue TRx

Daspi HAPPY Manual preview
HAPPY
Brand: Daspi Pages: 2
M-system LC Instruction Manual preview
LC
Brand: M-system Pages: 4
Harman Kardon Stratophonic SR300B Owner'S Manual preview
Stratophonic SR300B
Brand: Harman Kardon Pages: 10
Harman Kardon BRUKSANVISNING AVR 255 Användarhandbok preview
BRUKSANVISNING AVR 255
Brand: Harman Kardon Pages: 58
Harman Kardon AVR 8000 Owner'S Manual preview
AVR 8000
Brand: Harman Kardon Pages: 60
Harman Kardon AVR 7550HD Quick Start Manual preview
AVR 7550HD
Brand: Harman Kardon Pages: 2
Harman Kardon AVR 7550HD Worksheet preview
AVR 7550HD
Brand: Harman Kardon Pages: 7
Harman Kardon AVR 70 Owner'S Manual preview
AVR 70
Brand: Harman Kardon Pages: 34
Harman Kardon AVR 630 Test Report preview
AVR 630
Brand: Harman Kardon Pages: 2
Harman Kardon AVR 3600 User Manual preview
AVR 3600
Brand: Harman Kardon Pages: 2
Harman Kardon AVR 335 Quick Start Manual preview
AVR 335
Brand: Harman Kardon Pages: 4
Harman Kardon AVR 2550 Specification preview
AVR 2550
Brand: Harman Kardon Pages: 2
Harman Kardon AVR 3500 Service Manual preview
AVR 3500
Brand: Harman Kardon Pages: 52
Harman Kardon AVR 430 Quick Start Manual preview
AVR 430
Brand: Harman Kardon Pages: 4
Harman Kardon NOCTURNE 210 Product Information preview
NOCTURNE 210
Brand: Harman Kardon Pages: 2
Harman Kardon AVR 2650 Quick Start Manual preview
AVR 2650
Brand: Harman Kardon Pages: 10
Harman Kardon AVR 1700 Quick Setup Manual preview
AVR 1700
Brand: Harman Kardon Pages: 140
Harman Kardon AVR 1510 Service Manual preview
AVR 1510
Brand: Harman Kardon Pages: 131

Brands by name

Popular brands

Load more brands